€414.51 tax incl.
Fanel 30-250 Bar Pressure Switch
New product
FF4-250 GL PAH
High pressure switch with plasic plunger
Warning: Last items in stock!
Availability date:
FF4-250 GL PAH
High pressure switch with plasic plunger
Throttle is fitted as standard on these switch. This must be removed for use with viscous medium
adapted for water, oils and air
GL - approval (Germanischer Lloyd) with a marine-type cable gland and additional grounding clap as standard
3/8" F. ST-5. Magnet without hole. Vertical mount.Cable 1200 mm. Contact 1 A - 250 V (AC1).Max. 350 bar / 30 lpm / 80 °CMin flow rate 3.5 lpm
3/8" F. ST-5. Magnet with hole. Horizontal or vertical mountMinimum flow rate 6.2 lpm (verical), 5.0lpm (horizontal)Cable 1200 mm. Contact 1 A - 250 V (AC1).Max. 350 bar / 30 lpm / 80 °C
P/N Shutter Gauge bolt Weight 28.0500.10 Delrin - 288 gr - 10,16 oz 28.0500.10 Brass - 300 gr - 10,58 oz Brass piston covering 28.0530.10 Delrin 1x 1/4 Bsp F 308 gr - 10,86 oz With 1/4 Bsp F gauge port 28.0535.00 Brass 1x 1/4 Bsp F 318 gr - 11,22 oz With 1/4 Bsp F gauge port
Common Features Rated Pressure 250 bar - 25 MPa - 3650 psi Permissible Pressure 280 bar - 28 MPa - 4050 psi Rated Temperature 90 °C - 195 °F Max. Voltage 250 V Max. Curr. Strenght 6 (2) A Electrical insulation 55 IP Material Brass
Common Features Rated Pressure 250 bar - 25 MPa - 3650 psi Permissible Pressure 280 bar - 28 MPa - 4050 psi Rated Temperature 90 °C - 195 °F Max. Voltage 250 V Max. Curr. Strenght 6 (2) A Electrical insulation 55 IP Material Brass
Common Features Rated Pressure 250 bar - 25 MPa - 3650 psi Permissible Pressure 280 bar - 28 MPa - 4050 psi Rated Temperature 90 °C - 195 °F Max. Voltage 250 V Max. Curr. Strenght 6 (2) A Electrical insulation 55 IP Material Brass